Halogenation effect promoted low bandgap polymers based on asymmetric isoindigo unit with low energy loss

To optimize the energy levels of the structural framework of isoindigo polymers, a series of asymmetric isoindigo based low bandgap polymers with chlorine, fluorine and thiazole substituents was constructed and their optical, electrochemical and photovoltaic properties were comparatively evaluated for the impact of different substitutions. In comparison with the polymer based on 2,2'‐bithiophene and isoindigo unit (PTi) with non‐substituted bithiophene as the donor moiety, the highest occupied molecular orbital energy level for the newly synthesized polymers is significantly decreased, and in turn an improvement of the open‐circuit voltage (V_OC) is noted in the corresponding photovoltaic devices. More importantly, combined with a low bandgap of 1.32 eV, the energy losses (E_loss) could be reduced to 0.61 eV for polymer based on chlorinated 2,2'‐bithiophene and isoindigo unit (PCl). In addition, the halogen moieties are observed to be superior in device fabrication and give better values than the thiazole substituent. Both fluorinated and chlorinated polymer donors exhibited improved performance compared with the original polymer PTi. Consequently, this work not only presents the influence of different electron withdrawing substituents on the physicochemical and photovoltaic performance, but also backs the concept of how to reduce the energy loss via the heteroatom effect. © 2020 Society of Chemical Industry     

Knocking down USP39 Inhibits the Growth and Metastasis of Non-Small-Cell Lung Cancer Cells through Activating the p53 Pathway

Ubiquitin-specific protease 39 (USP39), a member of the deubiquitinating enzyme family, has been reported to participate in cytokinesis and metastasis. Previous studies determined that USP39 functions as an oncogenic factor in various types of cancer. Here, we reported that USP39 is frequently overexpressed in human lung cancer tissues and non-small-cell lung cancer (NSCLC) cell lines. USP39 knockdown inhibited the proliferation and colony formation of A549 and HCC827 cells and decreased tumorigenic potential in nude mice. Specifically, knocking down USP39 resulted in cell cycle arrest at G2/M and subsequent apoptosis through the activation of the p53 pathway, including upregulation of p21, cleaved-cas3, cleaved-cas9 and downregulation of CDC2 and CycinB1. Moreover, USP39 knockdown significantly inhibited migration and invasion of A549 and HCC827 cells, also via activation of the p53 pathway, and downregulation of MMP2 and MMP9. Importantly, we verified these results in metastasis models in vivo. Collectively, these results not only establish that USP39 functions as an oncogene in lung cancer, but reveal that USP39 has an essential role in regulating cell proliferation and metastasis via activation of the p53 pathway.     

超快激光在纳米溶液中的超连续光丝光谱技术

为了产生宽谱带超连续白光光谱，将飞秒激光聚焦到纳米溶液中形成光丝，最终产生出400～950 nm的超连续白光光谱。采用集成CCD的显微镜装置对伴随光丝的气泡进行拍摄，并研究了气泡定向运动的规律。计算表明，气泡的运动速度可以达到0.16 m/s，这表明水流也可以达到相应的速度。这种由光丝导致的高速水流，可对微流控技术的研究起到积极的作用。     

Influence of surfactants on rheological behaviors of polyacrylonitrile/dimethyl sulfoxide/silicon blending polymer solutions

KH550, KH560, CTAB, and F127 were adopted to modify silicon (Si) to improve the dispersity and stability of Si in the polyacrylonitrile/dimethyl sulfoxide (PAN/DMSO) polymer solutions. The influence of surfactants on rheological behaviors of PAN/DMSO/Si blending polymer solutions was investigated by an advanced solution and melt rotation rheometer. The homogeneity and stability were also studied. The results showed that the surfactants could change the viscosity dependence of blending polymer solutions on shear rate, temperature and storage time by increase the steric hindrance of Si. Among the four solutions, PAN/DMSO/Si blending polymer solution with F127 exhibited the lowest viscosity, activation energy and the smallest structural viscosity index and exhibited the trend close to the Newtonian fluids. Moreover, PAN/DMSO/Si blending polymer solution with F127 exhibited the best dispersity and stability, indicating its best physical properties and machinability.     

Nano-Al doped-MoO3 high-energy composite films with excellent hydrophobicity and thermal stability

Developing the thermal stability of metal-based ceramic composites or their films has always been challenging and bottlenecks for the utilization of energy. In this paper, the novel mesh-like functional Al doped-MoO₃ nanocomposite film with even distribution and high purity was firstly fabricated by the high-efficiency electrophoretic deposition and surface modification. The optimal suspension turned out to be the mixture of isopropanol and the additives of polyethyleneimine and benzoic acid. The microtopography, crystalline structure, environmental resistance and thermal stability were analyzed by field emission scanning electron microscope (FESEM), energy dispersive X-ray (EDX), X-ray diffractometer (XRD), exposure and droplet-impacting test, DSC analysis and ignition test, respectively. The water contact angle and sliding angle of product can reach ~170° and <1°, indicating the excellent anti-wetting property. In addition, the high heat-release (~3180 J/g) of product all kept almost unchangeable after six months exposure experiments, demonstrating the outstanding thermostability. The exquisite design idea here can perfectly match microelectromechanical system (MEMS), providing the valuable reference for fabricating other metal-based high-energy composites with long lifespan for real industrial applications.     

Fabrication of direct Z-scheme FeIn2S4/Bi2WO6 hierarchical heterostructures with enhanced photocatalytic activity for tetracycline hydrochloride photodagradation

A series of direct Z-scheme FeIn₂S₄/Bi₂WO₆ hierarchical heterostructures with intimate interface contacts were synthesized by in-situ growth route and characterized by systematical analyses. All as-prepared FeIn₂S₄/Bi₂WO₆ nanocomposites showed significantly enhanced photocatalytic activity towards photodegradation for the removal of tetracycline hydrochloride (TCH) in comparison with individual FeIn₂S₄ and Bi₂WO₆. Meanwhile, the highest photocatalytic degradation activity can be achieved by modulating adding amount of FeIn₂S₄ in FeIn₂S₄/Bi₂WO₆ nanocomposites and the optimized component ratio of FeIn₂S₄ to Bi₂WO₆ is determined to be 10 wt%. The enhanced photocatalytic activity could be ascribed to efficient separation between photogenerated holes and electrons based on the construction of direct Z-scheme system. The high photocatalytic stability of resultant 10 wt% FeIn₂S₄/Bi₂WO₆ nanocomposites was revealed through six successive recycling reactions. The main intermediate generated during TCH photodegradation was explored by HPLC-MS. Besides, the direct Z-scheme photocatalytic mechanism was confirmed by band position analysis, electron spin resonance (ESR) and active species capture experiment.     

Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the con-trol system's performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part's layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.     

Fabrication and joining mechanism of Nano-Cu/Si3N4 ceramic substrates

A novel method for fabricating a nano-Cu/Si₃N₄ ceramic substrate is proposed. The nano-Cu/Si₃N₄ ceramic substrate is first fabricated using spark plasma sintering (SPS) with the addition of nanoscale multilayer films (Ti/TiN/Ti/TiN/Ti) as transition layers. The microstructures of the nano-Cu metal layer and the interface between Cu and Si₃N₄ are investigated. The results show that a higher SPS temperature increases the grain size of the nano-Cu metal layer and affects the hardness. The microstructure of the transition layer evolves significantly after SPS. Ti in the transition layer can react with Si₃N₄ and with nano-Cu to form interfacial reaction layers of TiN and Ti–Cu, respectively; these ensure stronger bonding between nano-Cu and Si₃N₄. Higher SPS temperatures improve the diffusion ability of Ti and Cu, inducing the formation of Ti₃Cu₃O compounds in the nano-Cu metal layer and Ti₂Cu in the transition layer. This study provides an important strategy for designing and constructing a new type of ceramic substrate.     

A General Strategy for Antimony-Based Alloy Nanocomposite Embedded in Swiss-Cheese-Like Nitrogen-Doped Porous Carbon for Energy Storage

Due to its suitable working voltage and high theoretical storage capacity, antimony is considered a promising negative electrode material for lithium-ion batteries (LIBs) and has attracted widespread attention. The volume effect during cycling, however, will cause the antimony anode to undergo a severe structural collapse and a rapid decrease in capacity. Here, a general in situ self-template-assisted strategy is proposed for the rational design and preparation of a series of M Sb (M = Ni, Co, or Fe) nanocomposites with M N C coordination, which are firmly anchored on Swiss-cheese-like nitrogen-doped porous carbon as anodes for LIBs. The large interface pore network structure, the introduction of heteroatoms, and the formation of strong metal N C bonds effectively enhance their electronic conductivity and structural integrity, and provide abundant interfacial lithium storage. The experimental results have proved the high rate performance and excellent cycling stability of antimony-based composite materials. Electrochemical kinetics studies have demonstrated that the increase in capacity during cycling is mainly controlled by the diffusion mechanism rather than the pseudocapacitance contribution. This facile strategy can provide a new pathway for low-cost and high-yield synthesis of Sb-based composites with high performance, and is expected to be applied in other energy-related fields such as sodium-/potassium-ion batteries or electrocatalysis.